With all of the safety concerns that homeowners have nowadays it is no wonder that there are a number of things that can set them off when they don’t necessarily need to be trying to protect you. One of the big things that have become commonplace on pretty much all automatic garage door openers is sensors. Garage door sensors work to keep your garage door open if there is something in the way which could get broken, injured or something similar. While these things do happen and these garage door sensors do come in handy in keeping us safe when it matters most they can also sometimes get fooled. When they get fooled or aren’t working properly it can be frustrating when you know your garage door is working but just won’t close. You probably don’t want to pay for some garage door service Omaha company to come out for something that isn’t necessarily a big deal to fix so here are a few tips. If your garage door opener just isn’t closing or is almost closing and then stopping here are a few things to check for. Hopefully after you know some of the quick fixes you won’t go and do something rash and end up needing a garage door panel Omaha replacement.
One thing that can happen and get your garage door sensors out of whack is just a small amount of movement. The sensors at the bottom of your garage door tracks are there to make sure that nothing is sitting in between your garage door and the ground to get in the way of your garage door closing. It would be bad for the garage door, the garage door opener and for whatever was in the way. However, if your sensors get moved and the garage door isn’t getting the go ahead even though there is nothing there that can be a problem. You’ll need to check that your sensors are aligned correctly and that they are clean and clear. If your garage door isn’t moving from the open position this is the first place to look for a problem.
If this isn’t the case and your garage door is closing to a certain point before reversing the problem could be different. Your garage door sensors aren’t sensing a problem then until sometime during the act of closing which you aren’t seeing. If this is the case check your garage door rollers and the garage door tracks for signs of debris or something that might give some resistance. Also look for anything hanging off of the garage door to see if something could get in the way of the sensors later. If you find any of these things, remove them or clean them up and you should find yourself with a now working garage door.
If you still can’t find any thing that would be causing these sorts of problems you may have something serious going on. You can try resetting your sensors or unplugging and replugging your garage door opener but beyond that things start to get a little dangerous. If none of these things work or you’re worried about doing any of the above garage door repairs then it is best that you call a garage door repair professional so that they can come and take a look at your garage door. If none of these things have worked then it is very possible that something aside for your garage door sensors are malfunctioning.